top of page

Wood Products

Wood baghouse filter AirAlanco Installation Moldow Installation

Baghouses/Filters

Commonly known as baghouses or fabric collectors, these units are used to separate dust particles from conveying air. These efficient, cost-effective dust collectors can achieve a collection efficiency of more than 99%.

Name Brands: Airlanco, MAC, Moldow, Pneumafil, Donaldson, Camfil Farr, and Sly

Balanced Fan/Motor Assemblies

Exhaust Fans/Blowers

The fan and motor system supplies mechanical energy to move contaminated air from the dust-producing source to a dust collector.

Name Brands: AirPro, Alphair, Blower Application Co., Cincinnati, Fan Equipment Co., IAP, and New York Blower

Wood Filtration Air Conveyor

Air Conveyors

Conveying systems are used widespread across a range of businesses. There are a variety of options available which can be equipped to fit specific needs.

Automatic Pneumatic Blast Gates

Automatic Blast Gates

Blast gates are used to focus a dust collection system's vacuum for maximum extraction at the desired location. Blast gates are positioned at individual pieces of machinery. When one blast gate is opened, all available suction is focused at that location, maximizing the amount of material collected.

Cyclones with support steel and ladder/cage assembly

Cyclones

Centrifugal collectors use cyclonic action to separate dust particles from the gas stream. In a typical cyclone, the dust gas stream enters at an angle and is spun rapidly. The centrifugal force created by the circular flow throws the dust particles outward to the wall of the cyclone. Cyclonic action spins these particles down and out of cyclone tail pipe.

Types include single-cyclone and multi-cyclone separators.

Specifically Designed Ductwork Manifolds

Ductwork/Piping

Ducts are used to supply and/or exhaust air in wood related applications. A duct system is custom designed, fabricated and installed for specific applications. Ducts are fabricated of galvanized, stainless steel or hot rolled sheet metal. 

Connection joints are installed using angle flanged and/or the recently introduced leaver lock clamps.

Choppers, grinders and waste reduction

Hogs/Chippers

Chipper shredders, grinders and hogs are used for waste size reduction.

Air plenums specifically designed per application

Plenums

Plenums provide trouble free extraction of very large quantities of dust and chips with unlimited volumes of extracted air. Normally suspended from a ceiling, the plenum allows for easy expansion and reconfiguring.

Name Brand(s): Moldow

TRM Filter – Large Capacity Filter with small footprint

TRM Filters

Developed in 1991 by Air Craftsmen, Inc., with its low noise - low horsepower and large filtering capacity, we call it the “Biggest Little Filter on the Market.” The filter is available in various modules depending on air volume requirements. Unit may be supplied with or without exhaust blower and motor. Waste is deposited in heavy-duty plastic bags (2 per section) for easy disposal. Waste container bags may be reused. Key Benefits include: high efficiency low air to cloth ratio and environmentally clean, separating 99.9% of particles.

used dust collector

Used Dust Collectors

Please contact for pricing and availability for used dust collectors.

Paper Products

Wood Filtration Air Conveyor

Air Conveyors

Conveying systems are used widespread across a range of businesses. There are a variety of options available which can be equipped to fit specific needs.

Wood baghouse filter AirAlanco Installation Moldow Installation

Baghouses/Filters

Commonly known as baghouses or fabric collectors, these units are used to separate dust particles from conveying air. These efficient, cost-effective dust collectors can achieve a collection efficiency of more than 99%.

Name Brands: Airlanco, MAC, Moldow, Pneumafil, Donaldson, Camfil Farr, and Sly

paper_baler_edited.jpg

Balers

Balers are typically used to compact waste material such as paper, plastic, corrugated and aluminum. Balers are made with hydraulic rams to compress the material. Balers range from simple, closed-door manual tie to complex, highly automated units. Balers are used in facilities generating volumes of waste requiring proper disposal. Baled waste is typically sold to recycling companies.
Air Craftsmen, Inc. is a distributor for BaleMasters.

Briquetter Baler

Compactor

A compactor is used to reduce the size of waste material through compaction. Powered by hydraulics, compactors take many shapes and sizes. Compactors are hydraulically powered with sliding rams, which sweep the collection hopper and deposit material into a waste holding tank.

Choppers, grinders and waste reduction

Chopper Fans/Trim Cutters

Chopper fans have sharpened impeller blades. They cut or tear material as it is drawn through the blower. Chopper fans are required for continuous trim that is easily torn and for discontinuous strands and loose pieces of material that need to be reduced in size. Ideal applications include paperboard, floor mat trim and scrap aluminum, among hundreds of others.

PAC chopper fans may be customized with non-stick coatings, corrosion-resistant materials and sound attenuation devices.

Cyclones with support steel and ladder/cage assembly

Cyclones

Centrifugal collectors use cyclonic action to separate dust particles from the gas stream. In a typical cyclone, the dust gas stream enters at an angle and is spun rapidly. The centrifugal force created by the circular flow throws the dust particles outward to the wall of the cyclone. Cyclonic action spins these particles down and out of cyclone tail pipe.

Specifically Designed Ductwork Manifolds

Ductwork/Piping

Ducts are used to supply and/or exhaust air in wood related applications. A duct system is custom designed, fabricated and installed for specific applications. Ducts are fabricated of galvanized, stainless steel or hot rolled sheet metal. 

Connection joints are installed using angle flanged and/or the recently introduced leaver lock clamps.

Balanced Fan/Motor Assemblies

Plenums

Plenums provide trouble free extraction of very large quantities of dust and chips with unlimited volumes of extracted air. Normally suspended from a ceiling, the plenum allows for easy expansion and reconfiguring.

Name Brand(s): Moldow

floor sweeps housekeeping

Floor Sweeps

Floor sweeps are used when bulk material needs to be removed from an area, such as a stripping station, or for clean up in and around baler rooms or Flexo machines.

Name Brand(s): Air Craftsmen, Inc.

Used Dust Collector for sale

Used Dust Collectors

Please contact for pricing and availability for used dust collectors.

Wood Products
Paper Products
bottom of page